Delta’s 60KW DC City Charger are an ideal solution for high-efficiency urban charging services. It supports simultaneous charging output and load distribution to optimize the utilization rate of the charging site. City Charger is compatible with OCPP which allows further backend system integration like user management, remote control, and energy management.
- More than 94% nominal efficiency.
- Easy to install, operate and service.
- Wired/4G GSM connectivity for integration with CMS.
- Simultaneous charging of two vehicles.
- User-friendly LCD display for customer interface.
- IP54 outdoor charging station
Specifications
Input Power | |
---|---|
Input Voltage (AC) | 3 Phase, 400 Vac, (350~450 Vac), 50Hz |
Power Factor | >0.98 |
Nominal Efficiency | >=94% |
Wires | 5 Wire, L1, L2, L3, N, PE |
Output | |
Number of Outputs | 2 Nos. (DC) |
DC Output | |
Max. Output Power | Up to 60kW |
Connectors | CCS Type 2 |
Output Voltage | 200-1000VDC |
Output | 125A Max. |
Environment | |
Operating Temperateure | -25°C to 55°C |
Storage Temperature | -25°C to 70°C |
Altitude | <=2000 Mtr |
Humidity | <95%, non-condensing |
User Interface & Control | |
Display | 7″ TFT LCD with Touch Control |
Language | English |
Key/Switch | On/Off, Emergency Stop (Mushroom Headed Red Color) |
User Authentication | OTP/RFID based |
Visual Indication | Mains, Charging Status, System Error |
Communication | |
Charger & CMS | Protocol: OCPP 1.6 (Open Charge Point Protocol) |
Interface: Ethernet, GSM-3G/4G | |
Protection | |
Protection | Over Voltage, Under Voltage, Over Current, Short Circuit, Surge Protection |
Door open, Over Temperature, Ground Fault, Residual Current & Smoke | |
Mechanical | |
Ingress Protection | IP55 |
Enclosure Protection | IK10 |
Cooling | Air cooled |
Output Cable | 5mtr. Standard |
Dimension (W*H*D) | 1730mm X 750mm X 450mm |
Weight | ~280 kg |