DVS-110W02-3SFP

High-end Layer 2 management, redundant self-healing ring and a wide-operating temperature from -40℃ to 75℃ are providing highly reliable network. The EMC noise immunity complies with IEC standards and attains a high level 3/4. The intuitive design of WEB GUI interface provides users with easy access and convenience.

Technology
Standard Compliance

• IEEE 802.3 10Base-T
• IEEE 802.3u 100Base-T(X) and 100Base-FX
• IEEE 802.3ab 1000Base-T
• IEEE 802.3z 1000Base-X
• IEEE 802.3x Flow Control
• IEEE 802.1D Spanning Tree Protocol
• IEEE 802.1w Rapid Spanning Tree Protocol
• IEEE 802.1s Multiple Spanning Tree Protocol
• IEEE 802.1p Class of Service, Priority Protocols
• IEEE 802.1Q VLAN Tagging
• IEEE 802.1X Port Authentication
• IEEE 802.3ad LACP Aggregation
• IEEE 802.1AB Link Layer Discovery Protocol

Processing Type
Store and Forward

• IEEE 802.3x Flow control in full duplex, back-pressure flow control in half duplex

Interface
Fast Ethernet

• RJ45 Ports: 7 10/100Base-T(X), auto MDI/MDI-X, auto negotiation

Gigabit Ethernet Combo Ports

• RJ45 Ports: 3 10/100/1000Base-T, auto MDI/MDI-X, auto negotiation
• SFP Ports: 3 100/1000Base-SFP
• Console Port：USB B-Type Connector

Digital Inputs(DI)

• 2 sets
• 0~+5V is OFF
• +11V~30V is ON
• Max. input current 6mA

Alarm Contacts(DO)

• 2 relay outputs
• Carry current 5 A@24VDC
• Reset Button: 1set

Performance and Scalability

• Switching Capacity: 7.4Gbps, Wired speed, Non-blocking switching fabric
• Forwarding Rate: 11Mpps
• MAC Address Table: 8K
• Packet Buffer Memory: 512K bits
• IGMP Multicast Groups: 256
• Max. VLANs: 255
• Quality of Service: 8 priority queues per port
• DHCP/BootP Server: 1275 IP addresses
• Jumbo Frame: 9,216 Bytes

Management
Software

• STP/RSTP/MSTP, LACP, QoS, IGMP Snooping v1/v2/v3, IGMP Query v1/v2, GARP, GMRP, VLAN, SSH, DNS, HTTP, HTTPS, RADIUS, TACACS+, SNMP v1/v2c/v3, SNMP Traps, TFTP, RMON, LLDP, BootP Server/Client, DHCP Server/Client, DHCP L2 Relay, DHCP Relay Option 82, DHCP Option 66/67, Telnet, Syslog, SMTP, SNTP Server/Client, IPv6, MODBUS TCP

Security: MAC/IP/TCP/UDP filtering, HTTPS, SSH, 802.1X, TACACS+, SNMP v3
Configuration: Web Browser, Cisco-like Telnet CLI, USB Local Console , SNMP, MODBUS TCP, IEXplorer Utility
MIB

• MIB II, Bridge MIB, SNMP MIB, Ether-like MIB, Q-Bridge/P-Bridge MIB, IF MIB, Traceroute MIB, TCP MIB, UDP MIB, IP MIB, RMON Group 1,2,3,9, Delta Private MIB

Power Requirements

• Input Voltage: 2 sets, 12 to 48 VDC redundant terminal block power input
• Input Current: Max. 0.95A
• Overload Current Protection: Present, Max. input current 3A
• Reverse Polarity Protection: Present
• Buffer Time: Min. 12ms at 24VDC

Physical

• Housing: IP40 aluminum metal case
• Dimensions: 145.3 mm(H) × 75 mm(W) × 108.7 mm (D)
• Weight: 564g
• Installation: Industrial DIN-Rail and wall mounting

Environmental Limits

• Operating Temperature: -40℃ to 75℃(-40℉ to 167℉)
• Storage Temperature: -40℃ to 85℃(-40℉ to 185℉)
• Ambient Relative Humidity: 5% to 95%(non-condensing)

Approvals

• Safety: UL 508, EN 60950-1, IEC 61131-2
• EMI: FCC 47 CFR Part 15 Subpart B Class A, IEC 61000-6-4, EN 55022
• EMS: IEC 61000-6-2

Environmental Type Tests

• Cold Temperature: IEC 60068-2-1
• Dry Heat: IEC 60068-2-2
• Humidity: IEC 60068-2-30
• Shock: IEC 60255-21-2
• Freefall: IEC 60068-2-32
• Vibration: IEC 60068-2-6
• Hi-Pot: 1.5KV